KFRAC1100-2500 is one of our range of Fire Rated Access Covers, designed, manufactured and tested to BSEN 1634-1:2014. 3rd Party Tests are carried out Exova Warrington Fire, notified body No. 0833. With its layers of Intumescent Seal these covers have been proven to pass an integrity test of 180 minutes when tested with a flaming test, a gap gauge Test and a cotton pad ignition test. In addition, with its layers of fireboard cladding to the underside , these covers have passed the Insulation Test of 180 minutes giving it a 180 minutes guaranteed fire rating.
Covers are certified to be used with either a concrete / tile infill mainly intended for internal use. Uniquely they can also be used externally with paver blocks for streetscape and pedestrianised precincts. Their design also makes them watertight by default. An 1100mm x 2500mm clear opening gives a 1470mm X 2870mm visible frame size. This is a large cover for equipment access – a crane is required to lift out the cover and would also be in place to remove or replace the equipment below.