The Kent Hinged Multi Vent Grille KHMVG-1200/1200 is a heavy-duty heel-proof grille which comes with angle frame. The grille comes with Kent lift-assist Mechanical struts as standard. They are used in areas where access is required on a regular basis or where an operator may arrive onsite on their own. They are often used to cover a staircase or over areas that may need equipment craned down into chambers below ground.
They are manufactured from Grade 304L or Grade 316L Stainless Steel as standard but the material can be changed to Mild Steel Galvanised if required. They are typically supplied with 5mm thick bars. The grilles feature laser-cut lettering which usually identifies the utility beneath or shows the project logo. These grilles have load-bearing bars which are stepped down 2mm-5mm below the surface of the transverse bars for aesthetic reasons.