








Kent Industrial Factory Ladder Grating is normally used to suit the KSBC range of drainage channels or the KAF Angle Frame and most Kent Industrial Gullies.
It is available ex stock normally in 150mm and 200mm widths, each 25mm deep with 5mm thick load bars. In areas which require a heavier duty grating, it is regularly ordered as 25mm deep with 8mm bars or sometimes 30mm or 40mm deep with 8mm bars. A spacing of 20mm between bars gives this a large free area.
It is therefore ideal for factories with pedestrian or heavy forklift traffic, with frequent, high-intensity washdown. Lockdown version is optional. This type of grating is very regularly specified for Meat, Dairy, Beverage, Pharmaceutical factories.
KLG150 – in 990mm lengths for KSBC150 Channels
KLG207SQ for KV215 Square Gullies
KLG216RD – for KV220 Round Gullies
Customisable: Stainless Grade, Width, Length and Loading
© Kent Stainless | Cookies | Site Map | Privacy Policy | Certifications | Terms & Conditions | Legal | Anti-Slavery Policy | Gender Pay Gap Report