Pulse Jet Drier Filter Tank | Kent Stainless

Kent Stainless manufactured this Pulse Jet Drier Filter for a municipal wastewater treatment project in 2018.
Installed adjacent to a sewage sludge drier, it was designed to lter the drier’s air exhaust. It incorporates 2 Explosion
Relief Hatches, Hinged Access Covers and a Back Pulse Filter Cleaning Auger to empty lter dust.
The overall height needed for the tank, hopper and leg supports is 4335mm long x 2428mm wide x 5508mm high (171in
x 96in x 217in). The tank is made from 5mm thick Duplex stainless steel and was tted to the lower hopper and to the
beam support legs mechanically on site.