ISO 9001:2015 accredited Quality Management System in operation companywide
EN 1090-2:2008 Factory Production Control Certificate – structural components and kits for fabricated structures
Fully compliant with the 2014 Construction Products regulation PR Directive on CE Marking
Visual Inspection
Visual Inspection
At EVERY stage in the process a visual inspection takes place and is
recorded in our Process Route Cards
Destructive Testing
Destructive Testing
At prototype stage the first sample is tested to destruction and all
strengths & weaknesses recorded on a timeline
Non-Destructive Testing
Non-Destructive Testing
15% of any production run is randomly pulled and tested. For the
Pharmaceutical sector, a typical request is for 10% Radiography Testing
Dye Penetration Tests
Dye Penetration Tests
100% Dye Penetration tests on non butt welds to BS 6443
X Ray Testing
X Ray Testing
Typically requested for Double Contained Drainage in the Pharmaceutical
and Chemical sector – 10%of production run is tested on request.
Hydraulic / Pneumatic Testing
Hydraulic / Pneumatic Testing
This test is generally carried out on our Double Contained Drainage
products and our Double Walled Tanks & Vessels to 7 PSI test pressure
Submersion Testing
Submersion Testing
Watertight Manholes are submerged in a specially constructed tank. Dye Penetration tests can be used in this tank to test seals.
Slip Resistance Testing
Slip Resistance Testing
For drainage products in wet environments, the surface of the gratings
are supplied in accordance with BS EN 7976 parts 1-3:2002 for slip
resistant value of SRV36
RA Testing
RA Testing
SRG4000 Surface Roughness tester is used to measure the RA value
at goods inwards and after polishing
Flow Testing
Flow Testing
Drainage Flow rates are designed & tested to BS EN 1253-1:2003 and
also to ASME A112.3.1-2007.
Wind Load Testing
Wind Load Testing
Using Solid Works and Cosmos
Load Testing
Load Testing
Physically tested on a test rig to FACTA Class A to E and DIN 19580
and EN124 and EN1253, and prEN1433
Galvanising Thickness Testing
Galvanising Thickness Testing
Hot Dip Galvanised coating supplied in accordance with BS EN 1461:2009. The amount of zinc coating covered by this standard is regularly exceeded for harsh coastal regions – 140 microns galvanised coatings are often applied and tested.
Fire Rating
Fire Rating
Products independently 3rd party certified by Exova Warringtonfire
Industry Memberships
Industry Memberships
Products independently 3rd party certified by Exova Warringtonfire
